Having mini-split installation done is a fantastic approach to solve comfort issues in your home. These systems don’t need ductwork to deliver energy-efficient heating and cooling. Like any other home comfort system, they can experience problems from time to time. Here are seven of the most typical mini-split troubles and how you can fix them.

1. Mini-Split Leaks or Can’t Drain Water

If your mini-split is dripping water or not draining water, there may be an issue with the condensate drain or drain line. It’s expected for a drain line to become clogged with mold, forcing water to back up and spill. Reach Myers Furnace Company at 816-249-1619 for assistance and we’ll get your drain unclogged promptly.

2. Mini-Split Makes Constant Noise

Mini-splits normally don’t create a lot of noise when they’re operating. But there are a couple of instances where they could produce sounds.

  • Popping or clicking: This can be because of the plastic housing expanding or contracting while the system is on.
  • Swooshing, crackling or gurgling: This can occur if your mini-split turns on defrost mode to stop itself from icing over.

You shouldn’t be troubled if you hear these noises since they’re expected. However, if your mini-split keeps going into defrost mode, it’s a symptom that something is off, including insufficient refrigerant, a bad circuit board or malfunctioning sensors. Your Myers Furnace Company HVAC tech will be able to find and solve the issue fast.

3. Mini-Split Isn’t Generating Heat

If your mini-split is not heating or blowing hot air, frozen coils might be the issue. Like we discussed before, frozen coils can be the effect of low refrigerant, a faulty circuit board or malfunctioning sensors. Reach us at 816-249-1619 for assistance.

4. Mini-Split Cooling Mode Won’t Work Properly

If your mini-split is not cooling or blowing cold air, there could be a refrigerant leak. Your mini-split AC uses refrigerant to move heat and keep your residence cool. These leaks must be repaired by a licensed HVAC pro, so call us at 816-249-1619 for help.

5. Mini-Split Drainage Is Clogged

Much like an air conditioner, a mini-split does a great job at dehumidifying during the summer. However, this might be halted by mold in the condensate drain line. Another reason your mini-split air conditioner may not be dehumidifying properly is if it’s too large. A system that’s too big will cool down a space too quickly without having a chance to dehumidify it. Mini-split size is calculated on square footage and BTUs.

6. Mini-Split Is Smelly

If your ductless mini-split smells, it’s trying to get your attention that something is wrong. Here are five of the most typical smells and what they mean.

Musty, Sour or Mildew

If your mini-split smells musty, sour or like mildew, you could have a mold issue. Have a specialist like Myers Furnace Company inspect and rinse the condensate drain and drain line, if required.

Vinegar

If your mini-split smells like vinegar or has a sweet odor, you’re probably dealing with a refrigerant leak. Another certain clue that you don’t have enough refrigerant is a lack of chilled air. Reach us at 816-249-1619 for help

Fish

If your mini-split smells like fish, the following things things could be wrong. In some situations this smell means there is electrical trouble or there’s a leak. Nevertheless, reach us at 816-249-1619 for assistance.

7. Mini-Split Isn’t Starting

If your mini-split will not power on, check the remote first. If the batteries are out of juice, your mini-split won’t switch on. In most experiences, putting in fresh batteries will fix the trouble. If you’re still having trouble, call us at 816-249-1619.

Turn to Us for Your Mini-Split Repair Needs

When you need mini-split repair or air conditioning repair in Belton, contact the company your neighbors and friends have trusted since year. Quality repairs, fair prices and your comfort are our top priorities! Reach us at 816-249-1619 to schedule your appointment today.